RSS

Category Archives: Antenocities Workshop

My Combined Army for Infinity so far

My Combined Army for Infinity so far

I just realised, that this is my first post in over two months. I guess my new years resolution must definitely be to post more.

One thing that I spend some a good amount of time on recently is getting started on my Infinity minis, namely Combined Army / Onyx Contact force. So what did I paint so far? You already saw the Xeodrons and Sogarat recently and this is what followed (all based on the Deep Forest bases by Antenocitis Workshop):

Rodoks

First I started with some Rodoks. As I said in my last Infinity post, I was not too happy with the sand tones and the Large OSL areas on the Sogarat. So I shifted to slightly different colors for the sand brown and use the OSL only for the eyes. Much happier with that. As a result I will probably paint the OSL on he Sogarat over, to match him better to the units I have. I als went and painted some geometrical lines over the helmets and shoulder pads instead of just picking out some plates. That also enhanced those minis a lot and will be used on the next Combined Army minis as well.

Rodok squad

Rodok squad

Rodok squad

Rodok squad

Last month I played my first three games of Infinity at a small tournament in Münster Germany and these saw their first use there. I am still a bit unsure about them. Thy packed a lot of punch in their link team and at times this proved to be deadly, but I felt they had problems making up their points and were pretty fast to die. So those will definitely need more testing to see if I like them.

Umbra Legates

I have to say I really loved these minis. Very fun to paint and the animation and poses are great. With these I also diversified the colors for the army by painting the apron-like parts of their uniforms in a reddish leather. It keeps with the brown theme of the rest of the army, but still adds some color. Same goes for the orange accents on these aprons, for they go nicely with the sand colours.

Umbra Legate

Umbra Legate

Umbra Legate

Umbra Legate

Umbra Legate

Umbra Legate

Umbra Legate

Umbra Legate

I played this one (counted as being armed with a spitfire) as part of the Rodok squad / link team at the tournament. Usually the other elements of his team worked out better, but once the range of his spitfire paid off.

Umbra Legate Hacker

Umbra Legate Hacker

Umbra Legate Hacker

Umbra Legate Hacker

Umbra Legate Hacker

Umbra Legate Hacker

Umbra Legate Hacker

Umbra Legate Hacker

I really love this minis. Game wise he was hard to tell at the tournament. During the first game, he never got close to anything hackable, but did very well in close combat. The second game my opponent had nothing hackable, but again he did good in close combat and secured me some vital points at the right moment. During the third game he stood his ground vs. a superior hacker only to be killed by a lucky rifle shot before his first activation.

Dr. Worm and drones

First of all, I found these minis very boring. Not much animation in them and somewhat unimaginative. Th good thing though is, that I got two of the old Dr. Worms off the Internet the other day, which should give me some nice variation in my army (together with the two more drones I already have).

To me they looked like green reptilian skin and that is the way I painted them, again adding more variation to the army. I went somewhat experimental and used some filters on their skin, that I usually use on armoured vehicle models. Otherwise I kept the brown / sand theme for their armour to blend them in with the rest off the army.

Med-Tech Obsidian Medchanoid and drones

Med-Tech Obsidian Medchanoid and drones

Med-Tech Obsidian Medchanoid and drones

Med-Tech Obsidian Medchanoid and drones

The drones were a mixed bag at the tournament. When thy were close enough to an injured / damaged unit the did their job nicely. When they were further away and had to get there, they usually died. That being said, for the minimal price tag they have and the chance to heal / repair other units without getting the Worm in harms way, they seem like a must buy item.

Dr. Worm himself was odd. Only once was he in a position to actually repair one of my Xeodrons and did a good job a it. He too proved very vulnerable, so I found it was good to keep him out of harms way (and more reason for the drones). But  what he did really well was killing unit moving though his LOS with a quick reaction shot.

Unidrons

These kind of are the linking element between my big TAG and the normal infantry in my Combined army. I decided to paint the (Onyx) TAGs and remotes with black and grey armour to make them look more menacing. Obviously this is at odds with the brown and sand of the infantry. But since the Unidrons come from the same bio-engineering process as the TAGs, their skin colours provide the link.

Unidrons

Unidrons

Unidrons

Unidrons

Before the tournament I had only painted these, because they were part of my starter and were on my workbench. During the tournament I really liked these. Yes they were more fragile than the Rodoks, but thy cost far less and seemed to provide better value for points. Plus these could be upgraded to forward observers for one point, which allowed them to claim the objectives. In fact I liked them so much, i ordered their box set.

Overdron

It was the Xeodrons that drew me towards the Combined Army when I decided to start with Infinity, so the Overdron was another must have item for me. The Overdron itself follows the colour scheme of th Xeodrons, while the Tin Bots that are to protect him follow that of the Unidrons.

Overdron and Tin Bots

Overdron and Tin Bots

Overdron and Tin Bots

Overdron and Tin Bots

Overdron and Tin Bots

Overdron and Tin Bots

Overdron

Overdron

Overdron and Tin Bots

Overdron and Tin Bots

Did not use him during the tournament, but on the grounds that he is even more expensive that the Xeodrons and that I had problems squeezing just one of them into 300 points, I daresay, I will rarely use him. Bit of a shame!

And that is it. Really like my force so far. So much so, that I felt a group shot was due:

Combined Army group shot

Combined Army group shot

Before anyone asks. I came last during the tournament, but I learned a lot. And I was quite happy with my result, since I managed to score a draw in one of my games. Not bad for my second game of Infinity ever.

 

 

 
3 Comments

Posted by on December 23, 2016 in Antenocities Workshop, Combined Army, Infinity, Sci-Fi

 

Infinity Combined Army Xeodrons and a Sogarat

Infinity Combined Army Xeodrons and a Sogarat

Well I am off on holidays which gives me the time to finally post some pictures of the stuff I finished in recent weeks and months.

As some of you may have realised from my recent terrain posts, I have started to take an interest in Infinity. A lot of the armies do look interesting, but the one to fire up my interest the most is the Combined Army. Right now I am just painting up the minis I like the most. I have to admit, that I do not know yet which ones really are good or which role they fulfill in the game, so do not expect too much info on the units themselves. In the end, I will do just what I always did when it comes to SciFi games… paint what I like and learn to play them afterwards.

Anyway… here are the minis. Up first is a pair of Overdrons. I really like the models. They are huge, about twice as tall as a human miniature. They have a nice mix of external armoured plates with the musculature / skin underneath. The original studio miniatures were painted with very dark armour and orangey skin. This created a very dark and menacing look which I wanted to go for, even though I had something different in mind for the rest of the army.

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

I also wanted to try and see how close I could get to the looks of the official studio miniatures. Those had a black base colour, over which several shades of grey were airbrushed. The edges of the plates where highlit with even lighter greys, finishing with an almost white. I found the idea of the softer shading together with the strong contrast at the edges interesting, but while painting, I quickly found I did not like this. So I went with somewhat softer contrasts airbrushed onto the miniature and only did the edges in a medium grey. Not as striking as the original, but more to my taste.

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

Infinity Combined Army Xeodron

And here is the pair together. Most people base their Infinity minis in a very clean and modern way. But I wanted something different so I based mine on jungle bases, or rather the Deep Forest bases by Antenocities Workshop. I also painted some mud splashes on the lower legs to round everything off.

Infinity Combined Army Xeodrons

Infinity Combined Army Xeodrons

Antenocities Workshop deep forest bases

Antenocities Workshop deep forest bases

As I said before, I want something different for the rest of the army. Something that makes them blend in with their surroundings. So the rest of the army will be painted in a very dark brown with consecutive highlights to a mid-brown. Markings / sections of the armour will be in a sand colour.

I am not entirely happy with the way this one turned out. Somehow the sand colour itself and the fact that I picked out individual plates remind me, too much of 40K minis. Before I left for my holidays, also started with some Radoks. In their case I picked out fewer individual plates, but painted some patterns on the larger ones. I also used a different colour to highlight the sand parts. All of this created a look more to my taste. But you will see those in a few weeks time. The OSL lights on the arms and legs are also not completely my taste. So I guess I will use those less on the other minis.

Infinity Combined Army Sogarat

Infinity Combined Army Sogarat

Infinity Combined Army Sogarat

Infinity Combined Army Sogarat

Infinity Combined Army Sogarat

Infinity Combined Army Sogarat

Infinity Combined Army Sogarat

Infinity Combined Army Sogarat

 

Forward Base, Habitat 4

Forward Base, Habitat 4

So it is time to upload the next Habitat from The Forward Bas Kickstarter. This time it is Habitat 4, which is the large L-shaped living quarters. All in all the general process on this one was the same as it was with the previous one. So a lot of the detailing was doing by using the masking film as a mask and airbrushing the habitat. But there are a few new things on this habitat and a few things and others I skipped on the previous one that I would like to go into more detail here.

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

First of all, you can see that this is a massive habitat as well. Not as tall as the previous one, but the footprint is almost as large and due to its L-shape it offers some interesting LOS options compared to a square or rectangular building. Also, this being a living habitat it features more monitors and air con units that the workshop and I really like how this adds character to the model.

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Now with the previous post, the solar panels on the roof were a little harder to make out. But there you get a clearer view of them, up on the roof. I really like the mirrored version you got with the KS. They are quite reflective and look the real deal as a result. If you look at the upper edge of the walls, you can see that the models come with solar panels etched into the MDF and I simply could not resist, but paint them up. But even though I airbrushed them with chrome paint, they are by far to as shiny as the moveable panels on the roof.

This photo also shows the Habitat Logo that Angus designed for me. The design will be repeated on the other barracks building, just with other numbers. And as you can see, the font, general arrangement and simple icons are present in all the logos, which should give them all a unified look in the end.

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

The ends of the habitats really live up with he clear acrylic windows and doors, as well the resin parts and the red markings. I was actually quite surprised how much light actually gets into the building. As you can see on the upper picture, the roof is in place and still you can see fairly far into it.

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

As strange as it sounds, this corner is actually my favorite part of this building. I cut the edges of the corner panels off at 45° and the really sink into the wall. It is hard to explain, but in really live, this gives it a really homogenized look, that makes the whole building appear like it was not made from MDF. I would advise everyone to do the same, especially since the kit comes with twice as many corner panels as you need, so even if you do not like the results, you will always have a spare part.

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

So as I promised in my last post, here is a better look at the Imperial (Warzone) / Ariadna unit logo that Angus  as kind enough to draw up for me. I am really happy with it. As you can see, after airbrushing it in red there is still a lot of work to do there, but it is worth the effort I think. And as you can see, I tried different colors for the keep clear area (the backdrop for the text is now white instead of red). I like this much better than the version I used on the other building an shall stick with this.

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

Antenocities Workshop Forward Base Habitat 4

One of the best thing about these buildings is the interior. There is the option for resin wall elements and furniture, both of which I decided to go for and they add so much to the building. I wanted a somewhat sterile look for the interior of the buildings. After al these are prefab buildings, serving as quick to deploy military or scientific outposts. If you look at SciFi movies, they usually convey this sterile look for these types of buildings and that is what I wanted to copy. So all the panels and furnitures are painted in an US Navy ghost grey and given slight highlights. Afterwards I accepted the buttons, handles and panels, painted the couches and seats as faux leather. The monitors simply received the printed screen provided with them. For the next couple of buildings, i really need to make sure the photos are more focused.

The one thing I am not too happy with yet is the double personal container unit standing on the floor on the bend of the L. It somehow does not seem to fit in. But I already have my sights set onto a set of consoles from AW that will probably replace them in due time. I just hope I will be able to remove them, without doing too much damage to the floor (already glued them to the model).

 

So, this is it for today… hope you liked it! Not 100% sure, when I will be able to post the next building. We did the test set-up for your game at Crisis the other week and found that we still needed more terrain than I I had though. Plus i sighed up for an Infinity tournament in November and I would like to play with a painted  army. But I will still try to mix one more habitat in from time to time.So please stay tuned!